Dixell Temperature Controller Manual Jun 2026

Here is a solid write-up organized like a professional technical guide.

The back of the controller usually features a screw terminal block. While specific layouts vary by model, the standard pinout logic is: dixell temperature controller manual

Press and immediately release the SET key. The target temperature will display for about 5 seconds before returning to the actual probe temperature. Change the Set Point: Here is a solid write-up organized like a

| Code Displayed | Meaning | Action | | :--- | :--- | :--- | | | Probe 1 (Room) Failure | Check wiring for breaks; replace the NTC probe. | | P2 / E2 | Probe 2 (Evaporator) Failure | Check wiring; replace probe. Defrost will rely on timer only. | | HA | High Alarm | Room temp is too high. Check if compressor is running or door is open. | | LA | Low Alarm | Room temp is dangerously low. Check setpoint and relay sticking. | | Pr2 | Cannot access menu | You are likely in User mode. Look for a parameter labeled PA (Password) and enter the factory code (often 22 ). | The target temperature will display for about 5