: Supply cord (standard or detachable depending on the specific sub-model). Official Documentation Links
The Operations Manual identifies standard parts visible to the user: : Quick-change "click" chuck for TE-Y (SDS-max) bits. hilti te 60 parts
Here’s a technical write-up investigating the (a rotary hammer drill), focusing on its parts, common failure points, and replacement considerations. : Supply cord (standard or detachable depending on
: Function selector switch, speed-control trigger, and power reduction (50%) buttons. : Function selector switch, speed-control trigger, and power
| Symptom | Likely Faulty Part(s) | Repair Action | |---------|----------------------|----------------| | No power, no sound | Cord, switch, thermal protector | Check continuity; replace faulty | | Motor runs but weak hammering | Pneumatic seals, striker, piston | Replace seal kit; inspect piston | | Reduced rotation speed | Worn brushes, armature damage | Replace brushes; armature if commutator burnt | | Bit not locking | Chuck spring / balls | Clean and regrease; replace spring set | | Heavy vibration | AVR isolators or bearings | Inspect AVR rubbers; check bearings | | Overheating quickly | Clogged air vents, worn bearings, armature short | Clean, bearing check, megger armature |