Ipx-183
If you need a text description (e.g., for a database, review, or reference), here’s a neutral, factual example:
Title: IPX-183 – BEAUTY VENUS V Series: BEAUTY VENUS (5th installment) Actors: A collective work featuring three prominent JAV actresses (specific names omitted for general reference). Studio: Idea Pocket Release Date: 2018 Runtime: Approx. 240 minutes Synopsis (non-graphic): This special collaborative release brings together three top exclusive actresses from the same studio in a single large-format production. The film is structured in multiple segments, allowing each performer to showcase individual scenes as well as a joint finale. Known for its high production value and cinematic lighting, IPX-183 is considered a “dream team” style release within the BEAUTY VENUS series, appealing to fans of each featured talent. Key attributes:
High-definition release Interactive POV sequences Costume and setting variations per act
The guide is organized into sections so you can jump to the part you need most. ipx-183
1. What is the IPX‑183? | Feature | Details | |---------|----------| | Device type | Network‑connected IP camera (bullet/box style) | | Resolution | 1080 p (1920 × 1080) @ 30 fps (optional 720 p mode) | | Lens | Fixed 2.8 mm (wide) or 4 mm (narrow) – interchangeable depending on kit | | Night vision | IR LEDs, up to 30 m (outdoors) / 8 m (indoors) | | Connectivity | 10/100 Mbps Ethernet (PoE) or optional 2.4 GHz Wi‑Fi (via accessory) | | Power | 802.3af PoE (48 V) or 12 V DC barrel jack (optional) | | Storage | micro‑SD slot (up to 256 GB) + optional NVR/cloud | | Operating temperature | –10 °C to +55 °C | | IP rating | IP66 (dust‑tight & water‑resistant) | | Typical uses | Home security, office surveillance, small‑business monitoring, remote property watch | If your unit differs (e.g., you have an older firmware version or a customized lens), most steps remain the same – just refer to the specific label on the camera for the exact spec.
2. Unboxing & Physical Inspection | Item | What to look for | |------|------------------| | Camera body | No cracks, lens clear, all ports intact | | Mounting bracket & screws | All screws present (M4×10 mm usually) | | PoE injector / Power adapter | LED indicator on the injector should light up | | Micro‑SD card (optional) | Inserted correctly, label matches capacity | | Quick‑start guide | Keep it handy for serial number & default credentials | | Cable (Cat5e/6) | No kinks; length sufficient for placement | Tip: Write down the serial number and MAC address (often printed on a label on the bottom of the unit). You’ll need them for warranty and for static‑IP assignments.
3. Physical Installation 3.1 Choosing a Mounting Spot If you need a text description (e
Field of View (FOV): Verify the camera’s horizontal FOV (≈ 92° for 2.8 mm lens). Lighting: Position so the IR LEDs illuminate the target area; avoid pointing directly at strong light sources (sunlight, headlights). Height: 2.5 – 3 m (8‑10 ft) is typical for door/drive‑way monitoring. Network Reach: Ensure the Ethernet cable can reach a PoE switch/injector or a Wi‑Fi access point (if using the optional Wi‑Fi module).
3.2 Mounting Procedure
Mark the drill holes on the wall/ceiling using the bracket’s screw holes. Drill pilot holes (M4). Secure the bracket with the supplied screws. Thread the camera into the bracket (it slides in and locks with a small lever). Route the Ethernet cable through the mounting hole (if you drilled a cable‑gland). Connect the cable to the PoE injector or PoE‑enabled switch. The camera’s LED should turn amber → green indicating power. The film is structured in multiple segments, allowing
If you’re using the optional 12 V DC adapter, connect the barrel jack and plug the adapter into a nearby outlet.
4. Network & Initial Configuration 4.1 Finding the Camera on Your Network | Method | Steps | |--------|-------| | IP Scan (recommended) | 1. Download a free scanner (e.g., Advanced IP Scanner or Angry IP Scanner ). 2. Scan the subnet where the PoE switch lives (e.g., 192.168.1.0/24). 3. Look for a device whose manufacturer string contains “IPX‑183” or “Hikvision” (the OEM chipset). | | DHCP Client List | Log into your router, view the DHCP client table, locate the new MAC address. | | ONVIF Device Manager | Install the free ONVIF tool; it discovers ONVIF‑compliant cameras automatically. | | Default IP (if static) | Some units ship with 192.168.1.100 . Connect a laptop directly to the Ethernet port, set its IP to 192.168.1.101 , and browse to http://192.168.1.100 . | 4.2 First‑time Login | Default Credentials | Username: admin Password: admin (or 123456 on some batches) | |---------------------|-------------------------------------------------------------| | IMPORTANT | Immediately change both the username and password after first login. Use a strong password (≥12 characters, mixed case, numbers, symbols). | 4.3 Assign a Fixed IP (recommended)
