Here’s a detailed write-up based on available technical data and common knowledge regarding the Foxconn N15235 motherboard , typically found in pre-built desktop PCs (e.g., Acer, HP, or OEM systems from the early-to-mid 2010s).
Write-Up: Foxconn N15235 Motherboard Specifications Introduction The Foxconn N15235 is an OEM (Original Equipment Manufacturer) motherboard, meaning it was primarily sold as part of complete desktop systems (e.g., Acer Aspire or Veriton lines) rather than as a retail product. As such, its specifications focus on reliability and basic functionality rather than extreme performance or overclocking. Form Factor & Dimensions
Form Factor: microATX (µATX) Dimensions: Approximately 244 mm × 244 mm (9.6" × 9.6") Mounting holes follow standard µATX layout.
Chipset & Socket
Chipset: Intel H61 Express (most common revision) CPU Socket: LGA 1155 Supported Processors: Intel Core i7, i5, i3 (2nd gen – Sandy Bridge; 3rd gen – Ivy Bridge with BIOS update), Pentium, Celeron.
Memory
Slots: 2 × DDR3 DIMM (240-pin) Max Capacity: 16 GB (8 GB per slot) Supported Speeds: DDR3 1066/1333/1600 MHz (runs at CPU’s supported speed) Architecture: Dual-channel foxconn n15235 motherboard specs
Expansion Slots
PCI Express x16: 1 slot (v2.0, for graphics card) PCI Express x1: 1 slot PCI (legacy): 1 slot (v2.3, 32-bit, 5V) Mini-PCIe: None (though some OEM variants may differ)
Storage Interfaces
SATA:
4 × SATA 3 Gb/s (SATA II, ports labeled SATA_1 through SATA_4) No native SATA 6 Gb/s (unless a 3rd-party controller is present – rare on H61).